A collection of Videos about Hang Gliding

Al's release dilemma.

Postby Bill Cummings » Mon Aug 08, 2011 11:51 am

Al,
Bill M. (Misiaszek?) that posts on: http://groups.yahoo.com/group/hhpa/ and on message, #13238, Bill M. has a Vimeo posting http://vimeo.com/26454691
On that video go to 0:25 and then again at 2:05 and watch him release with his right hand from Aero tow. He releases by bending his wrist down.

Perhaps a release like Bill M. uses for Aero towing and rigged to a Tad E. straight, pin, barrel release would work off of boat platform towing.

This might even work for payout running behind the truck launching. It would not have the climb restricting bridle rope to the keel and a driver could get your nose too high near the ground. I don’t like that idea but at least you could release without letting go.

An in the teeth release like Tad posts about would be another way of doing either style of towing without the need to take your hands off the control frame.

Platform towing will take away the running part of launching and have you safely above stall speed before you release from the platform. This would take you out of the situation you were in running and not being able to let go to release.
Bill Cummings
User avatar
Contributor
Contributor
 
Posts: 3349
Joined: Wed Jul 13, 2011 6:20 pm
Location: Las Cruces NM 88005 (Region 4)

Re: Al's release dilemma.

Postby ZackC » Wed Aug 10, 2011 7:15 pm

billcummings wrote:Al,
Bill M. (Misiaszek?) that posts on: http://groups.yahoo.com/group/hhpa/ and on message, #13238, Bill M. has a Vimeo posting http://vimeo.com/26454691
On that video go to 0:25 and then again at 2:05 and watch him release with his right hand from Aero tow. He releases by bending his wrist down.

The password for the video is 'green'.
billcummings wrote:Perhaps a release like Bill M. uses for Aero towing and rigged to a Tad E. straight, pin, barrel release...

It's not a Tad E. release, but it is a straight pin barrel release (of Bill's own design).
billcummings wrote:...would work off of boat platform towing.

I think Bill originally developed this release for platform towing (truck or boat).
billcummings wrote:This might even work for payout running behind the truck launching.

He tried the release for foot launch aerotowing but it released prematurely when he transitioned to the basetube. I know he was trying to modify it to work for both foot and dolly launching but I don't know if he succeeded.
billcummings wrote:Platform towing will take away the running part of launching and have you safely above stall speed before you release from the platform. This would take you out of the situation you were in running and not being able to let go to release.

YES.

Zack
ZackC
User avatar
Contributor
Contributor
 
Posts: 36
Joined: Mon Feb 21, 2011 9:03 pm

Forum Statistics

Who is online

Users browsing this forum: No registered users and 6 guests

Options

Return to Hang Gliding Videos

cron